manualshive.com logo in svg

Xerox DocuPrint N2025, Service Manual

The Xerox DocuPrint N2025 is a high-quality laser printer designed for professional printing needs. Get the most out of your printer by downloading the free user manual from 88.208.23.73:8080. Learn how to set up, troubleshoot, and optimize your printer with this comprehensive manual. Perfect for those seeking efficient printing solutions.

Share
Download
background image

02/2000

5-3

DocuPrint N2025/N2825

Introduction

Parts-list

Initial Issue

Introduction

Overview

The Parts List section provides exploded view illustrations of all spared subsystem
components and a listing of the corresponding part numbers. The illustrations show the
relationships between parts.

Organization of this Section

The following elements make up the Parts List section:Parts Lists (PL)Each item number in the
part numbers listing corresponds to an item number in the illustration. All the parts in a given
subsystem of the machine will be located in the same illustration or in a series of associated
illustrations. The parts which are not spared are indicated by “- -” in the Part column. 

Exploded View IllustrationsAn item that is called out on an illustration has a corresponding
listing within this section.Components are given item numbers that correspond to the part
number listings.  Hardware items are lettered. All hardware dimensions are in millimeters
unless otherwise noted. 

Assemblies and kits are a combination of several separate components. A bracket is used on
the illustration when an assembly or kit is spared but is not shown. The item number of the
assembly or kit precedes the bracket; the item numbers of the piece parts follow it.Part Number
IndexThis index lists all the spared parts in the system in numerical order. Each number is
followed by a reference to the parts list on which the part may be found.

Other InformationAbbreviationsAbbreviations which may be used in the parts lists text or
illustrations are as follows:US ------ United States Parts Distribution SystemXE ------ European
Parts Distribution SystemAO ------ South America Parts Distribution SystemXCL ------ Canada
Parts Distribution SystemP/J ------ Plug/Jack P/O ------ Part ofW/ ------ WithW/O ------
WithoutTagA Tag is used when a part or area of the system has been modified. The Change
Tag Index, which is found in the General Procedures/Information Section, lists the name and
purpose of the Tag. In some cases, you will go to the parts lists and find a part number listed as
“with Tag.” Go to the Change Tag Index for a description of what the Tag is and what you need
to install the Tag. The Change Tag Index will either list a kit number or indicate “piece part.” If
“piece part” is indicated, the parts lists reference(s) will be given and all parts associated with
the Tag will have to be individually located, ordered, and installed.The notation “P/O Tag” after
a part number indicates that the item is part of a Tag. The notation “Tag” after a part number
will be used only to indicate the entire Tag, whether that is a kit number or an individual
part.Whenever you install a Tag kit or all the piece parts that make up a Tag, mark the
appropriate number on the Tag matrix.

Using the Parts List

1.

The numbers shown in each illustration correspond to the parts list number for that
illustration.

2.

Throughout this manual, parts are identified by the prefix “PL”, followed by a number, a
decimal point, and another number. For example, PL3.1.12 means the part is item 12 of
parts list 3.1.

3.

The capital letters “C”, “E”, and “S” shown in an illustration stand for C-ring, E-ring, and
Screw, respectively.

4.

A shaded triangle t in an illustration indicates the item is part of an assembly.

5.

The notation “with X~Y” following an part name indicates an assembly that is made up of
components X through Y. For example, “1 (with 2~4)” means part 1 consists of part 2, part
3, and part 4.

6.

The notation "RS" means that the part is a requested spare. Part numbers for these parts
will be provided as soon as they are available.

7.

An asterisk * following a part name indicates the page contains a note about this part.

8.

The notation “J1<>J2 and P2” is attached to a wire harness. It indicates that connector
jack 1 is attached to one end of the wire harness and connector jack 2 is attached to the
other end that is plugged into plug 2.

9.

A notation "(part of item 1.1)" indicates that the part is included with item 1.2.1 (PL1.2, line
item 1).

Summary of Contents for DocuPrint N2025



























































































































































































































































































































































































Reviews:

No comments

Related manuals for DocuPrint N2025

QMS Magicolor 2 Desklaser Install Manual preview
Magicolor 2 Desklaser
Brand: QMS Pages: 60
Xante Ilumina Repacking And Shipping Manual preview
Ilumina
Brand: Xante Pages: 6
Z Corporation ZPrinter 650 Hardware Manual preview
ZPrinter 650
Brand: Z Corporation Pages: 99
Canon ip1500-srm Simplified Service Manual preview
ip1500-srm
Brand: Canon Pages: 21
Canon PIXMA iP2700 Simplified Service Manual preview
PIXMA iP2700
Brand: Canon Pages: 23
DataSouth Documax A6300 Series User Manual preview
Documax A6300 Series
Brand: DataSouth Pages: 180
Oce DFS10 Operator'S Manual preview
DFS10
Brand: Oce Pages: 90
Xante FilmMaker 4 Quick Reference Manual preview
FilmMaker 4
Brand: Xante Pages: 31
Xerox LS 3270 User Manual preview
LS 3270
Brand: Xerox Pages: 55
Tektron ME1301 Operation Manual preview
ME1301
Brand: Tektron Pages: 72
Xerox 6R941 Quick Reference Manual preview
6R941
Brand: Xerox Pages: 8
Oki OKIPAGE 10e Setup Manual preview
OKIPAGE 10e
Brand: Oki Pages: 20
Kyocera ECOSYS FS-6530MFP Specfications preview
ECOSYS FS-6530MFP
Brand: Kyocera Pages: 2
FujiFilm Printpix NC-400D User Manual preview
Printpix NC-400D
Brand: FujiFilm Pages: 47
Fuji Xerox ApeosPort C5570 Reference Manual preview
ApeosPort C5570
Brand: Fuji Xerox Pages: 290
Tektronix 1235N - Phaser Color Laser Printer Service Manual preview
1235N - Phaser Color Laser Printer
Brand: Tektronix Pages: 240
SEWOO SLK-TE20 Series User Manual preview
SLK-TE20 Series
Brand: SEWOO Pages: 31
L-Mark LK-330E User Manual preview
LK-330E
Brand: L-Mark Pages: 62

Brands by name

Popular brands

Load more brands