Maintenance
Xerox
®
FD70 Scanner
Scanner User Guide
37
3.
Pull on the scanner cover release and lift the lid to open the scanner.
4.
Use the Duplex button to initiate roller rotation. Each time you press on the Duplex button,
the rollers will rotate slightly, allowing you to clean the rollers efficiently.
5.
Use a roller cleaning paper, or wet soft cloth with isopropyl rubbing alcohol (70%), to clean all
of the rollers.
Note:
Be careful when cleaning the rollers. All of the rollers, except the free rollers, are designed to
rotate in one direction only. Do NOT force the roller to rotate in the opposite direction. Forcing the
roller to rotate will damage it, and cause the scanner to feed pages incorrectly.
CLEANING THE BACKGROUND PLATES
The background plates are located underneath the scanner glass in both the top and bottom of
the scanner. If you see a warning message that one of the background plates is dirty, simply clean
the scanner glass as described here.
1.
Pull on the scanner cover release and lift the lid to open the scanner.
2.
The following illustration shows the location of the glass in the scanner.
Use a soft cloth to wipe clean the glass. You can use a roller cleaning paper to clean the glass
plates if there is any sticky residue on the surface.
Summary of Contents for FD70
