Maintenance
Xerox
®
FD70 Scanner
Scanner User Guide
43
5.
The lower roller is held in place with a lock tab that rotates to lock and unlock it. To unlock the
tab, rotate it until the small lock flange is completely free.
6.
Carefully angle the roller up and out of the scanner and then discard it, it cannot be replaced.
7.
Take the new roller out of its packaging. Clean any dust off the roller before installing it.
8.
Insert the left end of the new roller assembly into the hole in the roller channel. Angle the
roller module into the roller channel. Align the tab on the lock flange with the slot in the
scanner.
Make sure that the gears on the roller module properly align to the gears in the scanner. Hold
the roller module in the scanner while you lock it in place.
Summary of Contents for FD70
