Xerox FreeFlow Print Server for Color 560/570 Print Server
Installation
2-10
Carrier Procedure Manual
2.2.32
①
Find the IOT Interface cable, which is packed in the larger
flat box inside the Xerox FreeFlow Print Server box.
②
Remove the
IOT Interface Cable from the plastic bag.
2.2.33 Plug one end of the IOT Interface Cable into the Aria PWB in
slot PCIe1 on the back of the Xerox FreeFlow Print Server. This is on
the left side of the back of the server.
2.2.34 Plug the other end of the IOT Interface Cable into the
corresponding slot on the Print Engine.
2.2.35 This system can come with one of two switches. If the DFE is
packed with the Cisco SD2005 5-port switch (110K21320), jump to
Step 2.2.36. If the DFE is packed with the Black Box 5-port USB-
powered switch (110K21340), jump to Step 2.2.56.
