Installation
Xerox FreeFlow Print Server for Color 560/570 Print Server
Carrier Procedure Manual
2-13
2.2.44 Plug another one of the three Ethernet cables (2 of 3) into a
second port on the Cisco switch.
The Ethernet cable from the Cisco switch is connected to
port #2 on the back of the DFE. This port is surrounded by
a black outer frame.
2.2.45 Plug the other end of the Ethernet cable (2 of 3) shown in
Step 2.2.45 into the port shown on the back of the Xerox FreeFlow
Print Server.
2.2.46 Plug the third Ethernet cable (3 of 3) into an open port on
the Cisco switch.
2.2.47 Plug the other end of the Ethernet cable (3 of 3) shown in
Step 2.2.47 into the RJ-45 receptacle on the print engine.
