Xerox FreeFlow Print Server for Color 560/570 Print Server
Installation
2-14
Carrier Procedure Manual
2.2.48
①
Plug the power cable into the port on the back of the
Cisco switch.
②
Plug the other end into the AC wall receptacle.
2.2.49 Plug the AC power cables for the
①
Xerox FreeFlow Print
Server and the
②
monitor into the AC wall receptacle.
Do not look for an AC power cord when unpacking the
Black Box switch. This switch is powered through the USB
cable that connects to the back of the Xerox FreeFlow
Print Server.
If this Black Box switch is not part of the system
configuration, jump to Step 2.2.55.
2.2.50
①
Retrieve the box with the Black Box hub. Remove the
②
switch and
③
the USB power cable from the box.
2.2.51 Plug the USB power cable into the back of the switch.
