Xerox 4590/4110 Copier/Printer System Administration Guide
5-5
5. Using the Scan Service
2.
Set the e-mail address, host name, and domain name.
a. Select
System Settings
.
b. Select
Network Settings
.
c. Select
Machine E-mail Address/Host Name
.
d. Select
E-mail Address
and then select
Change Settings
.
e. Enter the
E-mail Address
using the keyboard displayed.
f. Select
Save
.
g. Set the
Host Name
and
Domain Name
as above.
h. Select
Close
.
3.
Set the protocol for receiving e-mail.
a. Select
Others
.
b. Select
Mail Receiving Protocol
and then select
Change
Settings
.
c. Select either
SMTP
or
POP3
as appropriate for your
environment.
d. Select
Save
and then select
Close
.
If
SMTP
has been selected
for the
Mail Receiving
Protocol
•
Select
SMTP Server Settings
and then set the following
items for the SMTP server.
•
SMTP Server - Port Number
Enter a value in the range from 1 to 65535.
If
POP3
has been selected
for the
Mail Receiving
Protocol
•
Select
POP3 Server Settings
and set then the following
items for the POP3 server.
–
POP3 Server - Setup
Select from
Specify by the IP Address
or
Specify by
the Server Name
.
–
POP3 Server - IP Address
Enter if
Specify by the IP Address
has been selected
for
POP3 Server - Setup
.
Summary of Contents for Legacy 4590
