How to customize the MAX 200
177
How to change the system features (continued)
Auto power off
Introduction
The
auto power off
feature
switches the machine power off, if the
machine is not used for a selected period of time. You set the time
period.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select
the
system features
tab.
3. Use the arrow buttons to select the
auto power off
feature.
4. Select
open
.
The
auto power off
screen
is displayed.
5. Select the desired default time;
No
,
1 – 5 hours
.
6. Select
done
to store your changes and exit from this screen.
To cancel the changes and exit from this screen, select
cancel
.
7. To exit, press the
custom presets
button
.
Custom Presets
3 Hours
1 Hour
2 Hours
4 Hours
No
5 Hours
Cancel
Done
Auto Power Off
Select time (from end of last job) until power off.
Press [Custom Presets] to return to
Previous screen.
System features
Copy features
Storage/Disk
Manager
Open
Time &Date
Auto Power Off
Auto Power save
Auto Clear/ Backlight Off
Attention Tone
Plotter Setup
Loading Stamp Data
