How to customize the MAX 200
231
How to change the copy features (continued)
Additional setting
Introduction
The
additional setting
feature
provides additional copy default
settings, for future needs. Depending on the code entered, the MAX
200 allows you to further customize your machine. If needed, service
will provide you with the additional setting code and field data.
The identified additional settings codes are:
•
Auto mode documentation feed direction default, code 20.
For detailed information on the identified codes, refer to page 173.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select
the
system features
tab.
3. Use the arrow buttons to select the
additional setting
feature.
4. Select
open
.
The
additional setting (copy feature)
screen
is displayed.
Press Custom Presets to return to
Previous screen.
System features
Copy features
Storage/Disk
Manager
Open
Auto Power Off
Auto Power save
Auto Clear/ Backlight Off
Attention Tone
Document Width
Plotter Setup
Loading Stamp Data
Additional setting
