36
Getting to know the MAX 200
RFC panel
There are four RFC panels, one for each roll. Each panel displays,
the amount of media on each roll, the media roll number, the media
type and the media series information.
The RFC panels are located on right side of the printer. For detailed
information about the RFC media specifications, refer to the
appropriate chart in
Media
, starting on page 43.
For instructions on how to load roll media into the drawer, refer to
page 49.
Icon
Function
Indicates the roll number in the RFC drawer.
The media supply indicator lamp displays the
amount of media on the roll. When the roll is empty,
there are no horizontal lines lit.
Message
Function
Displays the media type. Media type is set from the
media type and series panel, on page 38.
Window
Function
Displays the media width for the selected series.
Media series is set from the media type and series
panel, on page 38.
Button
Function
Press the
trim
button
to perform the auto cut
function on roll media. For detailed information on
how to use the trim button, refer to page 52.
Note: To enable the trim function, the printer
must be offline.
