Xerox Production Stacker 6-1
Operator Manual
6
6
Troubleshooting
Problem
Cause
Solution
Does not run when top
cover or door is closed.
No power
•
Check that the power cord is connected to the
wall outlet
•
Check if printer is ready
•
Check communication cable from Xerox
Nuvera Product line printer to stacker for
proper connection
•
Check for other area if the mimic not
illuminated
•
Check the service switch position (Refer to
Warning Pictograms Location in the
Introduction)
Poor registration
High paper curl
•
Adjust printer decurler
•
Flip paper in printer paper tray
Mechanical obstruction
•
Check for obstruction in the stacker paper path
•
Ensure that all transports and baffles are
properly seated
Paper Jams
High paper curl
•
Adjust printer decurler
•
Flip paper in printer paper tray(s)
•
Switch to heavier weight paper
