background image

Windows NT 4.x Network

Phaser® 7300 Color Printer

18

6. 

Click 

Next 

to accept the printer's default name or enter an alternate name, and then click 

Save 

Changes

 before clicking 

Next

.

7. 

The information dialog box displays the files to be copied to your system. Click 

Next

 to install the 

files and 

Finish

 to complete the installation.

Other methods of installation

Your printer can also be installed on a Windows NT network using one of these methods:

Microsoft TCP/IP protocol

AppleTalk protocol

The CentreWare IS program on your 

Advanced Printer Management Tools CD-ROM 

can also 

be used to monitor and configure the printer. If your printer is connected to a Windows NT 
network with the TCP/IP protocol enabled, you can use a web browser to monitor and configure 
your printer through CentreWare IS.

For installing or managing multiple printers on a Windows NT network with the TCP/IP protocol 
enabled, you can use the Xerox CentreWare MC snap-in to Microsoft Management Console. Refer 
to the 

Xerox CentreWare MC User Guide

 on the 

Advanced Printer Management Tools 

CD-ROM

.

You can use Xerox TCP/IP Port Monitor to add or remove TCP/IP ports for installations using the 
PCL 5c driver.

Quick install steps (Microsoft TCP/IP protocol)

1. 

At the Desktop, right-mouse-click the Network Neighborhood icon and select 

Properties

.

2. 

Click on the 

Protocols

 tab and verify that the TCP/IP protocol has been loaded.

3. 

Select the 

Services

 tab and verify that 

Microsoft TCP/IP Printing

 is loaded.

4. 

If this software is not present, install it using the documentation provided by Microsoft, and then 
return to this document.

5. 

Open the 

Control Panel

 and double-click the 

Printers

 icon.

6. 

Double-click 

Add Printer

; the 

Add Printer Wizard

 starts.

7. 

Verify that 

My Computer

 is selected and click 

Next>

.

8. 

Click 

Add Port

.

9. 

From the list that appears, select 

LPR Port

.

10. 

Click 

New Port

. This opens up the 

Add LPR

 compatible printer window. 

11. 

Type the IP address of your printer and a printer name of up to 31 characters (no spaces).

12. 

Select 

OK

. The Wizard returns you to the previous dialog. Verify that the new IP address you 

entered is in the list and is correct. The check box to the left of the address must be checked; if it is 
not, check it, and then select 

Next>

.

13. 

Insert your printer’s 

Printer Installer and Utilities CD-ROM

 into your computer’s CD-ROM 

drive and click 

Have Disk

.

14. 

Click the 

Browse

 button and select the directory containing the Windows NT drivers.

15. 

Select the 

*.INF

 file.

Summary of Contents for P H A S E R 7300



















































Reviews: