U
SING
C
ONTROL
P
ANEL
3.
3
Control Panel Lights
The control panel lights indicate the status of your printer. If the
light is on, the printer is
experiencing an error. See “Troubleshooting Error Messages” on page
7.17
.
Control Panel Light Message
The
light is on and the printer is ready to print.
No action is needed. If you press and hold the
button for about 2 seconds,
a demo page will print.
Ready mode
The printer is out of paper.
Load paper into the printer. For the automatic tray, there is no need to press
any button to reset. For the manual tray, press the
button after loading.
Paper out
In the Manual Feed mode, the printer is waiting for the
button to be pressed.
Press the
button to start printing. You must press the button to print each
page after loading paper into the manual input tray.
Waiting for the
button to be pressed
The printer is receiving or processing data. Wait for the job to print.
Pressing the
button cancels the current job. One or two pages may
print as the printer clears the print job. The printer will return to the Ready
mode after the job has been canceled.
Processing