Advanced Features and Troubleshooting Manual
23
Control Panel Menus
Subnet Mask
Sets the four byte Subnet Mask address. (This menu item only appears if
IP
Address Res
is set to
static
.)
Values:
xxx.xxx.xxx.xxx
where
xxx
=
000
to
255
Note:
Once the control panel shows
Subnet Mask
on the top line, use the
Value
keys (labeled
3
or
7
) to scroll to the desired value at the cursor
location. To move the cursor, use the
Item
keys (labeled
2
or
6
). Thus, you
can change characters within the address rather than having to re-enter the
entire address.
Default Gateway
Sets the four byte Default Gateway address. (This menu item only appears if
IP Address Res
is set to
static
.)
Values:
xxx.xxx.xxx.xxx
where
xxx
=
000
to
255
This item only appears if IP Address Res. is set to
Static
.
Note:
Once the control panel shows
Default Gateway
on the top line,
use the
Value
keys (labeled
3
or
7
) to scroll to the desired value at the cursor
location. To move the cursor, use the
Item
keys (labeled
2
or
6
). Thus, you
can change characters within the address rather than having to re-enter the
entire address.
Port Timeout
Sets the time for determining when to end an incomplete print job and poll
the next port in the polling sequence. This menu item also causes an implicit
job end (such as Control D in PostScript or <ESC> E in PCL) and invokes the
emulation functions associated with this action (e.g., formfeed, reset, etc.).
Values (in seconds):
5
-
300
(default is
60
)
The value changes by 1 each time you press either
Value
key (labeled
3
or
7
). Hold down either key to scroll quickly through the values.
Speed
Sets the speed and half/full duplex mode of the 10/100 BaseT Ethernet
interface.
Values:
Auto
(default)
10/Half
10/Full
100/Half
100/Full
DDNS Enable
Allows the printer to pass its Fully Qualified Domain Name (FQDN) to the
Dynamic Host Control Protocol (DHCP) server.
Values:
On
(default)
Off
9100 Timeout
Sets whether timeout is observed for the AppSocket Port 9100
communications protocol.
Values:
On
(default)
Off
Ethernet Menu Items (cont'd.)
Summary of Contents for PHASER 5400
