background image

Status and Service 
Messages

magicolor 6100 DeskLaser User's Guide

6-16

ENERGY SAVER

The printer is in energy saver 
mode to reduce power 
consumption during periods of 
inactivity.

No action needed. When 
a print job is received, 
the printer returns to 
normal power within 90 
seconds.

While in “sleep,” the 
printer’s message 
window will not display 
operator status such as 
door- and cassette-open 
messages. The printer 
remains in “sleep,” until 
a print job is received, or 
until the printer is 
manually switched from 
offline to online. 

FRONT DOOR OPEN

The front cover is open and 
must be closed.

Close the front cover.

FUSER MISINSTALLED

The fuser is not fully seated.

Ensure the fuser is fully 
seated.

FUSER OIL EMPTY

The oil bottle for the fuser is 
empty. The printer will not print 
any more copies until a new oil 
bottle is installed.

Install a new fuser oil 
bottle.

FUSER OIL LOW

The oil bottle for the fuser unit is 
running low. 

If you have a new fuser 
oil bottle on hand, you 
may want to install it 
now. If you don’t, order 
one now. A limited 
number of copies (about 
100) will still print. 
However, when the oil 
runs out, the printer 
stops and the 

FUSER 

OIL EMPTY

 message 

appears.

This status message...

means...

Do this...

Summary of Contents for Phaser 6100















































































































































































































Reviews: