Storing the Printer
magicolor 6100 DeskLaser User's Guide
7-2
Caution: Failure to follow the instructions provided in this chapter could void your
warranty.
Storing the Printer
Keep the following in mind when storing the printer for an extended period:
1
Unplug the printer.
2
Remove the toner cartridges from the printer and return them to their origi-
nal packaging. If the original packaging is not available, protect the toner
cartridges from spilling toner.
3
Remove the fuser oil bottle.
Caution: Hold a sheet of paper under the
oil bottle as you remove it, so no oil drips
into the printer.
4
Turn the nozzle on the opening on the bottom clockwise
to close it. Place the oil bottle (nozzle up) in an oil-proof
container such as a plastic bag, until you’re ready to
reinstall it.
5
Use the fuser oil remover syringe that came with your
printer or an eye-dropper to remove any excess oil from
the printer.
»
Note:
Dispose of the oil in accordance with local safety laws and regulations.
Nozzle
Summary of Contents for Phaser 6100
Page 1: ...magicolor 6100 DeskLaser User s Guide 1800543 001C ...
Page 10: ......
Page 156: ......
Page 198: ......