Configuration Menu
magicolor 6100 DeskLaser User's Guide
1-14
NMS1
–
NMS3
SNMP (Simple Network Management Protocol) is a standard protocol used to monitor
devices and the networks to which they attach.
The NMS1, NMS2, NMS3 menus allow you to identify and configure up to three
Network Management Stations (NMSs). You must provide the following information
about each NMS that you want to be able to access the printer: Internet address, com-
munity name, and access.
NMSx Community Name
A community is a group of SNMP agents managed by an NMS, and a community
name is associated with a specific NMS address. For the NMS to gain access to the
device, the correct community name (up to 15 characters in length) must be supplied
when connecting.
NMSx Address
The NMS Address option allows you to set the IP (internet protocol) network address
for the NMS so the printer can communicate with the network. Traps, if enabled, are
sent to this address. The address has the form
xxx.xxx.xxx.xxx
.
Menu
Network/NMSx/NMS
x Community
Choices
Up to 15 characters
Default
Public
Notes
Once you save your changes to this menu, the printer automatically
reboots.
Menu
Network/NMSx/NMSx Address
Choices
Each triplet can have a value of 000–255
Default
000.000.000.000
Summary of Contents for Phaser 6100
Page 1: ...magicolor 6100 DeskLaser User s Guide 1800543 001C ...
Page 10: ......
Page 156: ......
Page 198: ......
