Using Media Other Than
Paper
magicolor 6100 DeskLaser User's Guide
3-12
Loading and Printing Transfer Media
1
In the printer driver (Paper tab, Media Type option), select Thick Stock.
2
Remove the upper media cassette from the printer (and remove any media
in the cassette).
3
Load the new media.
4
Reinsert the upper media cassette in the printer.
Using Transparencies
Type
For information about transfer media recommended for your printer, refer
to the magicolor 6100 Answer Base at www.minolta-qms.com/support/
(click on Answer Base or the sun icon).
Weight
Do not exceed the limits for thick stock, up to 43 lb (163 g/m²).
Print Mode
Thick Stock
Formatting Format the information to be printed on the transparencies within your
application. Try printing your data on a plain sheet of paper first to check
placement.
Input
Cassette
Standard upper media cassette only
Capacity
Up to 50 sheets, depending on the thickness of the transparencies
» Note: If you have problems feeding 50 sheets, try loading only
5–10 sheets at a time. Loading a large number of
transparencies at a time may cause static buildup, thus causing
feeding problems.
Type
Use any transparencies (also known as OHP film) that meet normal
photocopier standards and that can withstand the fusing temperature (392°
F/200° C). We recommend
— Xerox 3R5765
— 3M CG3710
Weight
24–41.75 lb (90–157 g/m²)
Print Mode Automatic
Summary of Contents for Phaser 6100
Page 1: ...magicolor 6100 DeskLaser User s Guide 1800543 001C ...
Page 10: ......
Page 156: ......
Page 198: ......
