Setting Up Your Printer
2.
5
Changing the Size of the Paper in the
Tray
To change the tray size to other size, you must adjust the paper
length guide properly.
1
Pull the tray out of the printer. Open the paper cover and
remove paper from the tray if necessary.
2
Pressing and unlatching the guide lock in the top of the
tray, pull the tray out manually.
3
Load paper into the tray.
4
Slide the paper length guide until it lightly touches the end
of the paper stack. Squeeze the paper width guide and
slide it to the edge of the paper stack without causing it to
bend.
For paper smaller than Letter-sized, return the paper
guides to their original positions and adjust the paper
length guide and paper width guide.
N
OTES
:
• Do not push the width guide far enough to cause the
material to warp.
• If you do not correctly adjust the width guide, it may cause a
paper jam.
5
Close the paper cover.
6
Slide the tray back into the printer.
Summary of Contents for Phaser 6110
Page 1: ......
Page 49: ...Software section ...
