2-Sided Printing
Phaser® 6250 Color Laser Printer
2-28
To perform automatic 2-sided printing:
1.
Insert paper into the tray. For more information see the “Basic Printing” topic in this
section. Place the side to be printed with the odd-numbered pages face down with the top
of the page at the back of the tray. If using paper with pre-punched holes, place the holes
toward the right side of the tray when you are facing the front panel.
Caution
If you change the type of paper in a tray, you must change the paper type on the front
panel to match the paper that you loaded. If you fail to do this, print-quality
problems can occur and the fuser can be damaged.
2.
In the printer driver:
■
Select the appropriate tray.
■
Select the orientation.
■
Select 2-sided printing as described in the table below.
3.
Click OK to accept the printer driver settings, then click OK to print.
Setting the Printer Driver for 2-Sided Printing
Operating System
Steps
Windows 98 or
Windows Me
1.
Select
File
, then select
.
2.
Click
Properties
.
3.
Select
Setup
, then select
Print 2 Sides
.
4.
Select or deselect
Bind On Top Edge
.
Windows 2000,
Windows XP, or
Windows Server 2003
1.
Select
File
, then select
.
2.
Click
Properties
.
3.
Select either
Flip On Long Edge
, or
Flip On Short Edge
in
Print On
Both Sides (Duplex)
on the
Layout
tab.
Windows NT
1.
Select
File
, then select
.
2.
Click
Properties
.
3.
Select either
Long Edge
, or
Short Edge
in
Print On Both Sides
(duplex printing)
on the
Page Setup
tab.
6250-058
PH
