System Administrator Functions
Configuring IP Address Filtering
1.
At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press
Enter
or
Return
.
2.
In the Embedded Web Server, log in as a system administrator. For details, refer to
Logging In as
the Administrator
on page 186.
3.
Click
System
>
Security
.
4.
Click
IP Address Filtering
.
5.
For IP Address Filtering, to enable an Internet Protocol, click its associated toggle button.
Note:
A check mark on the toggle button indicates that the feature is enabled.
6.
To add an IP Address:
a.
For Allowed IP Address/Subnet Mask, click
Add
.
b.
In the Enter IP Address field, enter the IP address of the host as X.X. X.X, where X is a number
from 0 through 255. For example, 192.168.200.10.
c.
In the Enter IP Mask field, enter the last digits of the network mask for the host.
d.
Click
OK
.
7.
To remove an allowed IP Address, for the IP Address:
a.
Click the
Trash
icon.
b.
At the prompt, click
Delete
.
8.
To edit an allowed IP Address:
a.
From the allowed IP Address list, click the IP Address.
b.
Edit the information.
c.
Click
OK
.
9.
When finished, to save your settings, at IP Address Filtering, click
OK
.
194
Xerox
®
Phaser
®
6510 Color Printer
User Guide
Summary of Contents for Phaser 6510
