Initial Setup
Phaser 7100 Color Printer
System Administrator Guide
13
Initial Setup at the Control Panel
The Installation Wizard
The first time the printer is turned on, the Installation Wizard starts. The wizard prompts you with a
series of questions to help you configure basic settings for your printer.
Configuration Report
After you complete the installation wizard, you can print a Configuration Report. The Configuration
Report lists the current settings of the printer. For details, see
Accessing the Configuration Report
on
page 14.
System Administrator Access at the Control Panel
To configure the printer from the control panel, press the
Menu
button, then navigate to the
Admin
Menu
. If the printer is locked, log in as the system administrator.
To log in as a system administrator:
1.
At the printer control panel, press
Menu
.
2.
Use the arrow buttons to type the administrator passcode, then press
OK
.
Locking or Unlocking the Printer
To lock or unlock the printer:
1.
At the control panel, press
Menu
.
2.
Navigate to
Admin Menu
>
System Settings
>
Panel Settings
.
3.
Navigate to
Panel Lock
>
On
, then press
OK
.
4.
When prompted, use the arrow buttons to change and revalidate the Passcode, then press
OK
.
5.
Navigate to
Max Login Attempts
, then select
Limited
or
Unlimited
.
6.
If Limited is selected, navigate to Login Attempts, then use the arrow buttons to select the
number of attempts allowed.
Assigning a Network Address
By default, the printer automatically acquires a network address from a DHCP server. To assign a static
IP address, configure DNS server settings, or configure other TCP/IP settings. For details, see
Configuring TCP/IP Settings at the Control Panel
on page 20.
Connecting to a Wireless Network
You can connect the printer to a wireless network using the optional Wireless Network Adapter. For
installation help, see the instructions packaged with the adapter.