Initial Setup
Phaser 7100 Color Printer
System Administrator Guide
14
Initial Setup in CentreWare Internet Services
CentreWare Internet Services is an application on the embedded Web server of the printer. This
application allows you to configure and administer the printer from a Web browser on any computer.
Accessing CentreWare Internet Services
Before you begin:
•
TCP/IP and HTTP must be enabled to access CentreWare Internet Services. If you disable either of
these services, you must enable them at the printer before accessing CentreWare Internet
Services.
•
Refer to the Configuration Report to determine your printer IP address.
To access CentreWare Internet Services:
At your computer, open a Web browser, type the printer IP address in the address field, then press
Enter
or
Return
.
Note:
If your printer is locked, type the system administrator user name and password to access
the Properties tab. The administrator user name is
admin
and the default password is
1111
.
Changing the System Administrator Password
Xerox recommends that you change the default system administrator password after configuring the
printer for security. Store the password in a secure location.
To change the administrator password:
1.
In CentreWare Internet Services, click
Properties
>
Security
>
System Administrator Settings
.
2.
Select
Enabled
next to
Set System Administrator’s Login ID
.
3.
Type the login ID next to
Administrator’s Login ID
.
4.
Type the new password next to
Administrator’s Passcode
.
5.
Retype the password to verify.
6.
Set the maximum number of login attempts between 0 and 10, as needed. Type 0 to allow an
unlimited number of login attempts.
7.
Click
Apply
.
Accessing the Configuration Report
The Configuration Report lists the current settings of the printer. By default, a Configuration Report
prints at startup.
Printing the Configuration Report
1.
At the printer control panel, press
Menu
.
2.
Navigate to
Print Reports
, then press
OK
.