Network Configuration
Phaser 7100 Color Printer
System Administrator Guide
21
Configuring IPv4 Dynamic Address Settings
1.
At the printer control panel, press
Menu
.
2.
Navigate to
Admin Menu
, then press
OK
.
3.
Navigate to
Network / Port
>
TCP/IP
.
4.
Navigate to
IPv4 Settings
>
Get IP Address
.
5.
Select
DHCP
,
DHCP/Autonet
,
BOOTP
, or
RARP
, then press
OK
.
Configuring DNS/DDNS Settings
Domain Name System (DNS) and Dynamic Domain Name System (DDNS) is a system that maps host
names to IP addresses.
1.
At the printer control panel, press
Menu.
2.
Navigate to
Admin Menu
, then press
OK
.
3.
Navigate to
Network / Port
>
DNS Server
.
4.
To allow your DHCP server to provide the DNS server address, press
Get IP Address from DHCP
.
Press
Enabled
, then press
OK
.
5.
Navigate to
IPv4 DNS Server Settings
, or
IPv6 DNS Server Settings
, then press
OK
.
6.
To manually provide the DNS server address, press
Server IP Address
. Use the arrow keys to type
the DNS server address, then press
OK
.
Configuring TCP/IP Settings in CentreWare Internet Services
If your printer has a valid network address, you can configure TCP/IP settings in CentreWare Internet
Services.
Configuring Settings for IPv4
IPv4 can be used in addition to or in place of IPv6. If both protocols are disabled, you cannot access
CentreWare Internet Services.
1.
In CentreWare Internet Services, click
Properties
>
Connectivity
>
Protocols
>
TCP/IP
.
Note:
IPv4 is enabled by default.
CAUTION:
If both IPv4 and IPv6 are disabled, you cannot access CentreWare Internet Services.
You must re-enable TCP/IP at the printer control panel before you can access CentreWare Internet
Services. Disabling TCP/IP or changing the IP address also disables any dependant protocols.
2.
Type a unique
Host Name
for your printer.