Network Configuration
Phaser 7100 Color Printer
System Administrator Guide
29
LPD
The Line Printer Daemon (LPD) protocol is used to provide printer spooling and network print server
functionality for operating systems such as HP-UX, Linux, and MAC OS X.
Note:
For information on setting up print queues on your client system, refer to your client
system’s documentation.
Enabling LPD
1.
In CentreWare Internet Services, click
Properties
>
Connectivity
>
Port Settings
.
2.
Select
Enabled
next to LPD.
Note:
Disabling LPD will affect clients printing to the printer over TCP/IP using the LPR printing
port.
Configuring LPD
1.
In CentreWare Internet Services, click
Properties
>
Connectivity
>
Protocols
>
LPD
.
2.
Type an LPD
Port Number
between
1 and 65535
, or use the default port number of 515.
3.
Type the
Connection Time-Out
.
4.
Type the
Maximum Number of Sessions
.
5.
If required, select
Enabled
next to TCP-MSS Mode.
Note:
TCP-MSS settings are common to LPD and Port 9100.
6.
If TCP-MSS mode is enabled, under
IPv4
, type the IP addresses for
Subnet 1
,
2
, and
3
.
7.
Click
Apply
.