Security
Phaser 7100 Color Printer
System Administrator Guide
51
IPsec
Internet Protocol Security (IPsec) is a group of protocols used to secure Internet Protocol
communications by authenticating and encrypting each IP data packet. IPsec allows you to control IP
communication by creating protocol groups, policies, and actions for the following:
Configuring IPSec
Note:
Secure HTTP (SSL) must be enabled with an installed digital certificate before you can
enable IPsec.
1.
In CentreWare Internet Services, click
Properties
>
Security
>
IPSec
.
2.
Select
Enabled
next to
Protocol
.
3.
Select
IKE Authentication Method
,
Preshared Key
, or
Digital Signature
.
4.
If you select
Preshared Key
, type the
Shared Key
, then retype the key to verify.
5.
Type the
IKE SA Life Time
(5–28800 minutes).
6.
Type the
IPSec SA Life Time
(300–172800 minutes).
7.
Select the
DH Group
type.
8.
Select
G1
or
G2
from the
DH Group
drop-down menu.
9.
Enable
PFS
as needed.
10. Type the
Specific Destination IPv4 Address
.
11. Type the
Specific Destination IPv6 Address
.
12. To restrict the printer from communicating with devices that are not using IPSec, select
Disabled
next to
Communicate with Non-IP Sec Device
.
13. Click
Apply
to accept the changes or
Undo
to retain the previous settings.
•
DHCP v4/v6 (TCP and UDP)
•
DNS (TCP and UDP)
•
FTP (TCP)
•
HTTP (Scan Out, TCP port 80)
•
HTTPS (Scan Out, TCP port 443)
•
HTTPS (Web Server, TCP port 443)
•
ICMP v4/v6
•
IPP (TCP port 631)
•
LPR Print (TCP port 515)
•
Port 9100 Print (TCP port 9100)
•
SMTP (TCP/UDP port 25)
•
SNMP (TCP/UDP port 161)
•
SNMP Traps (TCP/UDP port 162)
•
WS-Discovery (UDP port 3702)
•
Up to 10 additional services