Printing on Specialty Media
Phaser® 7400 Color Printer
3-47
1.
If you loaded paper or media with a height less than 111 mm (4.4 in.), open the left-side
output tray.
2.
When the control panel prompts you to confirm the type and size of paper in the tray,
select
Change setup
, and then press the
OK
button.
3.
Select the appropriate paper type, and then press the
OK
button.
4.
If the correct custom size appears in the menu, select it, and then press the
OK
button. If
you are using a new custom size, set the custom width and custom height:
a.
Select
New Custom Size
, and then press the
OK
button.
b.
Use the
Up Arrow
and
Down Arrow
buttons to select the value for the custom width,
and then press the
OK
button.
c.
Use the
Up Arrow
and
Down Arrow
buttons to select the value for the custom height,
and then press the
OK
button.
5.
When you submit your print job, either set the document size in the application to the
custom size, or select
Tray 1
as the paper source in the printer driver.
1
2
3
7400-012
1
2
3
7400-012
