Macintosh
Phaser® 8560/8860 Printer
3-13
Creating an AppleTalk Printer with Mac OS X, Version 10.3 and Higher
To create an AppleTalk printer:
1.
Verify that
AppleTalk
is enabled in
System Preferences
.
2.
Open the
Print Center
utility. In Mac OS X, version 10.3 or higher, open the
Printer
Setup Utility
. The utility is located in a directory called Utilities in the Applications
directory.
3.
Select
Add Printer
, and then select
AppleTalk
from the pull-down list.
4.
Select the appropriate zone.
5.
Select your printer from the list provided.
6.
Select the appropriate
PPD
from the list in the
Printer Model
drop-down list. If your
printer PPD is not listed, install it from the
Software and Documentation CD-ROM
.
7.
Click
Add
to complete the configuration.
See also:
Online Support Assistant at
www.xerox.com/office/8560Psupport
or
www.xerox.com/
office/8860support
Creating a Bonjour Printer with Mac OS X, Version 10.3 and Higher (Recommended)
To create a Bonjour printer:
1.
Open the
Print Center
utility. In Mac OS X, version 10.3 or higher, open the
Printer
Setup
utility. The utility is located in Utilities in the Applications directory.
2.
Select one of the following options:
■
Version 10.3
: From the top pull-down menu, select
Bonjour
.
■
V
ersion 10.4 and higher
: Select your printer from the list and ensure
Bonjour
and
not AppleTalk is in the
Connection
column. Your PPD is automatically selected.
A list appears displaying name of your printer, followed by a series of numbers. For
example,
Your Printer’s Name xx:xx:xx
. Each numbered segment represents the last
section of your printer’s hardware address. Your PPD is automatically selected.
3.
Click
Add
to complete the installation.
