Printer Settings
Phaser® 8560/8860 Printer
4-9
Paper Handling Settings
This section includes:
■
Selecting Tray 1 Mode
on page 4-9
■
Selecting Tray 2–N Mode
on page 4-10
■
Setting the Duration for the Tray 1 Prompt
on page 4-12
■
Changing the Load Paper Timeout
on page 4-13
Selecting Tray 1 Mode
The Tray 1 Mode setting specifies:
■
How Tray 1 paper type and size are determined when you load paper in the tray but do not
select the paper type and size on the control panel.
■
When Tray 1 is used for print jobs.
To select the Tray 1 mode setting, use one of the following options:
■
The printer’s control panel
■
CentreWare IS
Setting
Description
Dynamic
(Factory default setting)
■
Uses the settings from the next print job that prints from Tray 1 to
determine the paper size and type.
■
Printer will print from Tray 1 when specified in the print job or when no
other tray has the job's requested paper size and type.
Static
■
The paper size and type already set for Tray 1 stay in effect.
■
Printer will print from Tray 1 when specified in the print job or when no
other tray has the job's requested paper size and type.
Automatic
■
Uses the settings from the next print job that prints from Tray 1 to
determine the paper size and type.
■
Printer will print from Tray 1 when paper is loaded, unless a different
tray is specified in the printer driver.
