background image

4

4-3

EX7750 Control Panel

EX7750 Control Panel

Use the EX7750 Control Panel to view status information, print special pages, and set 
up printing. While most elements in the Control Panel display have counterparts in 
Command WorkStation, you can view current functions on the Control Panel even 
when Command WorkStation is not connected to the server or is not running.

The Control Panel is located on the front of the EX7750.

Safety warnings

The EX7750 display window is a liquid crystal display (LCD) made of glass, and it can 
break. Do not subject it to strong shocks.

If the display window breaks and the liquid crystal material leaks out, do not inhale, 
ingest, or touch it. If the material gets on your skin or clothing, wash it off with soap 
and water immediately.

Do not put excessive pressure on the display window. This will change the color of 
the

 

window.

Activity light

The activity light indicates the current EX7750 activity. If the light is:

Solid red

An error has occurred, causing the EX7750 to be disabled.

Flashing red

An error has occurred, causing printing to be disabled, but 
the EX7750 is capable of processing.

Solid green

The EX7750 is idle.

Flashing green

The EX7750 is processing or printing a job, or 
communicating with a remote computer.

No light

The EX7750 is off or starting up.

Summary of Contents for Phaser EX7750





























































































































































































































Reviews: