T
ROUBLESHOOTING
11
8 Type the IP address 169.254.208.164 using the keypad.
N
OTE
:
If the IP address is correct, no update occurs. In this case, restart the Fiery manually.
For more information, see
“To manually restart the Integrated Fiery Color Server”
9 Press 4 TCP/IP - Subnet Mask and press Change Settings.
10 Type 255.255.0.0 using the keypad and press Save.
11 Continue to press Close on the Control Panel to close the Settings panels.
12 Press Exit.
To configure the EFI Splash RPX-iii IP address, see “Configuring the EFI Splash RPX-iii for
the TCP/IP network” in the
If automatic discovery does not work, the following procedure explains how to configure the
Macintosh IP connection manually.
T
O
CONFIGURE
THE
M
ACINTOSH
IP
ADDRESS
MANUALLY
1 Choose System Preferences from the Apple menu on the EFI Splash RPX-iii, and then choose
Network.
The TCP/IP Control Panel appears.
2 From the Show menu, choose Built-in Ethernet for the TCP/IP network.
3 Choose Manually from the Configure menu.
4 Type the IP address 169.254.208.163 and Subnet mask 255.255.0.0.
5 Reboot the Fiery and wait for the Start Page to print.
6 Start the EFI Splash RPX-iii.
