T
ROUBLESHOOTING
15
Restarting the Fiery
The following procedures explain how to restart the Xerox EX Print Server and the Integrated
Fiery Color Server.
T
O
MANUALLY
RESTART
THE
X
EROX
EX P
RINT
S
ERVER
1 Ensure that the Fiery is not receiving, processing, or printing any files.
Idle appears on the Fiery functions area of the digital press Control Panel when the Fiery is
finished processing jobs.
If the system has just finished processing, wait at least five seconds after the system reaches
Idle before beginning the restart procedure.
2 Press the Menu button once to display the Functions menu.
3 Select Restart Server.
N
OTE
:
Do not use the reset button on the front panel.
You may have to wait a few minutes for the Fiery to restart and print a Start Page and for the
EFI Splash RPX-iii to detect the Fiery. The EFI Splash RPX-iii will not complete the
connection until the Fiery Start Page prints.
Once the connection is successful, the EFI Splash RPX-iii Startup Page prints.
T
O
MANUALLY
RESTART
THE
I
NTEGRATED
F
IERY
C
OLOR
S
ERVER
1 Ensure that the Fiery is not receiving, processing, or printing any files.
2 If needed, press the Services button on the digital press Control Panel.
3 Touch All Services on the touch screen.
4 Touch Web Applications, and then touch Restart Server on the touch screen.
5 At the login prompt, select the Administrator option, and then touch the Password field.
6 Use the keyboard on the touch screen to enter the Administrator password for the Fiery, and
then touch Save.
The default Administrator password is
Fiery.1
. However, the network administrator may have
configured a new password for the Fiery.
7 Touch Login on the touch screen.
8 Touch Restart Server.
Wait approximately three minutes for the Fiery to restart and print a Start Page and for the
EFI Splash RPX-iii to detect the Fiery. The EFI Splash RPX-iii will not complete the
connection until the Fiery Start Page prints.
Once the connection is successful, the EFI Splash RPX-iii Startup Page prints.
