background image

I

NTRODUCTION

5

I

NTRODUCTION

This document identifies common problems that may occur with the Splash RPX-iii 
Xerox 700 Digital Color Press and suggests ways of correcting them.

The troubleshooting process

The Splash RPX-iii Xerox 700 Digital Color Press is connected to the Xerox 700 Digital 
Color Press and a Xerox EX Print Server by using Direct Connect or Network Connect. 
This document discusses problems that may occur with any of the following:

• Splash RPX-iii Xerox 700 Digital Color Press

• Interface between the Splash RPX-iii Xerox 700 Digital Color Press and the Xerox EX 

Print Server

• Interface between the Splash RPX-iii Xerox 700 Digital Color Press and the network

Issues that relate exclusively to the Xerox EX Print Server and the interface between 
the Xerox EX Print Server and the Xerox 700 Digital Color Press are beyond the scope of this 
document. For information about operating, servicing, and troubleshooting the Xerox EX 
Print Server, see the documentation that accompanies the print server.

N

OTE

Detailed information about the Apple Macintosh computer is beyond the scope of 

this document. If you require more information specifically about operating, servicing, and 
troubleshooting the Macintosh computer, see the documentation that accompanies your 
Macintosh.

Terminology and conventions

This document uses the following terminology and conventions. 

Term or convention

Refers to

Digital press

Xerox 700 Digital Color Press

Fiery

Xerox EX Print Server and Integrated Fiery Color Server

Mac OS

Mac OS X

EFI Splash RPX-iii

Splash RPX-iii Xerox 700 Digital Color Press

Titles in 

italics

Other documents in this set

Windows

Microsoft Windows 2000, Windows XP, Windows Server 2003, 
Windows Vista

Summary of Contents for Splash RPX-iii 700



















Reviews: