background image

XES Synergix 8825/8830/8850/8855 Windows NT 4.0 PostScript Print Driver User Guide

ii

Table of Contents

Trademark Acknowledgments ......................................................... i
Introduction...................................................................................... 1

Purpose of this Guide ..................................................................... 1
Basic Requirements........................................................................ 1
How to Use this Guide .................................................................... 1

Before You Start .............................................................................. 2

Check your protocol and printer port............................................... 2
Printing a PRINTER CONFIGURATION Test Print ......................... 3

Driver Installation ............................................................................ 4

Driver File Format ........................................................................... 4
Driver Installation Procedure........................................................... 5

Driver Configuration........................................................................ 6

Accessing the Printer Properties Dialog.......................................... 6
Printer Properties Dialog Tabs........................................................ 7

Device Settings Parameters...................................................................... 8

Accessing the Document Properties Dialog .................................. 10
Document Properties Dialog Tabs ................................................ 11

Advanced Tab Parameters ..................................................................... 11

PAPER/OUTPUT PARAMETERS...................................................... 11
GRAPHIC PARAMETERS.................................................................. 13
DOCUMENT OPTIONS PARAMETERS............................................ 14

Page Layout (N-up) Option .............................................................14
PostScript Options ..........................................................................14
AccXes Options ..............................................................................16

Job Tab Parameters ............................................................................... 17

BANNER PAGE.................................................................................. 17
LABELING .......................................................................................... 17
RASTER STAMP................................................................................ 18
FINISHING.......................................................................................... 19
PLOT NESTING ................................................................................. 19
MEDIA MISMATCH ............................................................................ 20
JOB PRIORITY................................................................................... 20

Page Setup Tab Parameters................................................................... 21

Feature Enhancements in Support of PostScript Printing ......... 22

Removing the Driver...................................................................... 23

Summary of Contents for Synergix 8825































Reviews: