September 2001
88XX Series Folder Operator Manual
22
Punching Submenu
Use this submenu to activate the punching system if it is available.
1.
Go to the “Punching” submenu.
in the Numeric Control Panel
in the Alphanumeric Control Panel
u
OPERATOR
U5
PUNCHING
2.
The default option is shown.
in the Numeric Control Panel
in the Alphanumeric Control Panel
u5 02
PUNCHING OFF
Lower right dot
flashing
3.
Use the scroll key to select the desired option and press “Enter” to
select it.
4.
Select
EXIT
[
u5.00
] to rise one level.
If an option is not available, code
E-14
“
NOT
AVAILABLE
SELECTION,
” will appear.
WARNING!
The punching device is available only with programs:
185 with margin 25mm
190 with margin 20mm
7.5 with margin 1”
WARNING!
The activation/deactivation of the punching by PC works only if
on the folder is selected the option “Punching On”.
If the selection on the PC do not produce any effect on the
punching device, set ”Punching on” on the folder control panel.
Punching
u 5
Exit
u 5.00
Punching
on
u 5.01
Punching
off
u 5.02
