September 2001
88XX Series Folder Operator Manual
49
Folding
Print sizes
−
ANSI, ARCH sizes : A (pass through), B, C, D, E
−
ISO, Afnor, Ericcson sizes : A4 (pass through), A3, A2, A1, A0
Longitudinal folding panel ANSI, ARCH:
−
7 ½ “, 8 ½ “, 9”, 11”, 12” (6½ inches to 12 inches)
−
Margin between 0 to 2 inches (step 5 mm)
Longitudinal folding panel (E0):
−
185mm, 190mm, 198mm, 210mm, 297mm, (165mm to 305mm)
−
Margin between 0 to 30 mm (step 5 mm)
Cross folding panel - cross (E0/US):
−
210mm/8½”, 297mm/11”, 305/12”mm (between 165 to 305mm)
Configuration
Where possible, the Universal Folder is available with the standard
configuration, and has the ability to add the following additional
options:
Second Output Bin:
•
The Second Output Bin increases the capacity of the folder up to
200A0/E.
•
The Second Output Bin also avoids system stops: if the first bin is
full, the system still goes on stacking the prints in the second bin.
•
The second bin also increases the system speed when two copies of a
job are needed: the Sorter Mode allows printing two copies of a
document and sorts them one per bin. In this way the printer
optimizes the rolls usage because it does not print all of the job twice
with changing the roll for every document. Instead, it prints
sequentially two copies of each document without loosing time due
to changing the rolls.
Rotation:
•
The Rotation enables the Folder to rotate the A2/C size. This allows
the folder to be combined with a printer that has three media rolls. It
can then make five standard sizes without the need to replace the
media roll.
Punching:
•
The Punching Device is a tool to make 3 or 4 holes automatically in
the binding margin of the folded print. The Punching option requires
the installation of the Rotation Bridge.
Alphanumeric
Control
Panel
:
•
The Alphanumeric Control Panel is available for the user who
wishes to have full feature selection, remotely from the system client
tools. This Alphanumeric Control Panel is included when the folder
is installed with the 8855 printer.
Listed below, are the five possible configurations to increase the
capability of the folder. Every optional will be indicated with a letter:
Rotation = R
2
nd
basket = B2
Punching = H3/H4 (under development)
Control Panel option = C
Configuration
2
nd
Basket
Punching
Rotation
STANDARD
NO
NO
NO
STANDARD - R
NO
NO
YES
STANDARD - B2
YES
NO
NO
STANDARD - R - B2
YES
NO
YES
STANDARD - R - Hn - B2
NO
YES
YES
