Settings · Setting the Fax Switch¦ 67
EN
4.
(Only for devices without built-in answering machine): Using
[
select the total number
of rings. . The device stops the ring after these total number of rings and accepts a call
or a possible silent fax.
5.
Confirm with
OK
.
6.
Use
[
to select the number of rings for the fax switch. After the number of rings, the
fax switch switches on and distinguishes between fax transmissions and telephone calls.
While the device is checking the call, it continues to ring.
7.
Confirm with
OK
.
8.
Using
[
, set the volume.
9.
Confirm with
OK
.
Silent Fax Transmission
Setting the Night Mode
1.
Press
OK
,
52
and
OK
.
2.
Configure the same settings as for the day mode (see steps
2
to
9
).
Setting the Timer
Timer
The timer switches between the modes
™
(day) and
˜
(night) at the configured times.
1.
Press
OK
,
53
and
OK
.
2.
Enter the time at which the device should switch to
™
(day) mode, for example
06
00
for 6 o'clock a.m.
3.
Confirm with
OK
.
4.
Enter the time at which the device should switch to
˜
(day) mode, for example
22
00
for 2 o'clock a.m.
5.
Confirm with
OK
.
Special Settings
Silent Fax Reception
If you would like to accept a fax without preceding rings, set the number of rings of the fax
switch to
0
.
Switching Off All Rings
All Rings Off
If you don't want to be disturbed, e.g. in the night, by any incoming calls, you can set the
number of rings to
0
. The device switches immediately to silent fax reception.
Notice
Silent Fax Transmission
Older devices do not transmit any fax-tone (= CNG tone) as an announcement for
fax transmission (= silent fax transmission). If the total number of rings has been set
to a value using
7
, silent fax transmissions cannot be received automatically.
Summary of Contents for TF4025.4075
