Adding Color Effects
If you have a color original, you can adjust the color of the copy using preset color effects. For
example, you can adjust colors to be brighter or cooler.
To add Color Effects:
1. At the printer control panel, press the
Home
button.
2. Touch
Copy
.
3. Touch
Color Effects
.
4. Select the required option. A confirmation message appears.
5. To accept the new color settings, touch
Apply
.
Book Copying
You can use the Book Copying feature to copy books, magazines, or other bound documents. You can
use this feature to copy images for different results.
• Copy either the left or right page onto a single sheet of paper.
• Copy both the left and right pages onto individual sheets of paper.
• Copy both the left and right pages as a single image onto one sheet of paper.
• Copy either the top or bottom page onto a single sheet of paper.
• Copy both the top and bottom pages onto individual sheets of paper.
• Copy both the top and bottom pages as a single image onto one sheet of paper.
Note:
To make copies from books, magazines, or other bound documents, use the document
glass only. Do not place bound original documents in the duplex automatic document feeder.
To set up book copying:
1. At the printer control panel, press the
Home
button.
2. Touch
Copy
.
3. Touch
Book Copying
.
4. Touch
Mode
, then select the typical page-reading order for the document, if needed.
Off
is the
default setting.
5. Touch
Pages
, then select the pages that you want to copy.
Note:
Available options vary, based on the Mode selection you have chosen.
6. To reduce the amount of white space in copies near the binding, touch
Binding Edge Erase
, then
move the slider to the right to erase up to 50 mm (2 in).
7. Touch
OK
.
104
