6. To complete the installation and close the installer window, click
Done
.
Installing the Windows Print Driver Zip File
From Xerox.com, you can download the print driver in a *.zip file. To install the print drivers on your
computer, use the Windows Add Printer Wizard.
To install the print driver from the *.zip file:
1. Download, then extract the required *.zip file to a local directory on your computer.
2. At your computer, open the
Control Panel
, then select
Devices and Printers > Add a Printer
.
3. Click
The printer that I want isn't listed
, then click
Add a local printer or network printer with
manual settings
.
4. To use a previously established port, select
Use an existing port
, then from the list, select a
standard TCP/IP port.
5. To create a standard TCP/IP port, do the following:
a.
Select
Create a New Port
.
b.
For Type of port, select
Standard TCP/IP Port
, then click
Next
.
c.
In the Hostname or IP address field, type the printer IP address or hostname.
d.
To disable the feature, clear the check box for
Query the printer and automatically select
the device driver to use
, then click
Next
.
6. Click
Have Disk
.
7. Click
Browse
, then select the
driver.inf
file for your printer. Click
Open
.
8. Select your printer model, then click
Next
.
9. If a prompt appears because the print driver was installed previously, click
Use the driver that is
currently installed (recommended)
.
10. In the Printer name field, type a name for your printer.
11. To install the print driver, click
Next
.
12. If needed, set the printer as the default printer.
Note:
Before you select
Share Printer
, contact your system administrator.
13. To send a test page to the printer, click
Print a test page
.
14. Click
Finish
.
Installing the Print Drivers for a Windows USB Printer
1. Connect the B end of a standard A/B USB 2.0 or USB 3.0 cable to the USB Port on the back of the
printer.
2. Connect the A end of the USB cable to the USB port on the computer.
3. If the Windows Found New Hardware Wizard appears, click
Cancel
.
73
