Scanner Options, Maintenance and Troubleshooting
Xerox
®
W130 Scanner
User Guide
6-7
Note:
Be careful when cleaning the rollers. All of the rollers, except the free rollers, are designed to
rotate in one direction only. Do NOT force the roller to rotate in the opposite direction. Forcing the
roller to rotate will damage it, and cause the scanner to feed pages incorrectly.
Cleaning the Scanner Glass and Background Plates
The background plates are located underneath the scanner glass in both the top and bottom of
the scanner. If you see a warning message that one of the background plates is dirty, simply clean
the scanner glass as described here.
1.
Pull on the scanner cover release and lift the lid to open the scanner.
2.
The following illustration shows the location of the glass in the scanner.
Use a soft cloth to wipe clean the glass. You can use a roller cleaning paper to clean the glass
plates if there is any sticky residue on the surface.
Cleaning the Paper Sensors
The scanner has several sensors to detect the status of the paper when it is in the scanner. You
should clean these sensors as part of your standard weekly maintenance of the scanner.
Note:
Do not clean the sensors with the roller cleaning paper.
Preparation
•
Turn off the scanner prior to cleaning the sensors.
