Xerox WorkCentre 3315DN User Manual Download

Page: 197 / 262

Troubleshooting

Xerox WorkCentre 3315DN/3325DN/3325DNI

User Guide

197

Gently pull the paper out of the

output tray

If you do not see the jammed paper or if there is any
resistance when you pull, stop and go to the next step.

Open the

rear door

If you see the jammed paper, pull down the pressure
levers on each side about 90 degrees and remove the
paper.

If you still do not see the paper, go to step 1 in the next
section, otherwise close the rear cover. Printing
automatically resumes.

Duplex Unit Area

If the

duplex unit

is not inserted correctly, a paper jam may occur. To avoid paper jams, make sure that

the

duplex unit

is inserted correctly with the edges of the unit aligned with the feed grooves on the

inside of the machine. The

duplex unit

is located at the rear of the machine.

.Pull the

duplex unit

out of the machine.

Remove the jammed paper from the

duplex unit

If the paper does not come out with the

duplex unit

, go

to the next step.

Summary of Contents for WorkCentre 3315DN







































































































































































































































































Search results

Summary of Contents for WorkCentre 3315DN

Reviews:

Related manuals for WorkCentre 3315DN

Brands by name

Popular brands

Xerox WorkCentre 3315DN, User Manual

Search results

Summary of Contents for WorkCentre 3315DN

Reviews:

Related manuals for WorkCentre 3315DN

Brands by name

Popular brands