Xerox WorkCentre 3315DN User Manual Download

Page: 204 / 262

Troubleshooting

Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide

204

The paper keeps jamming.

• There is too much paper in the tray. Remove excess paper from the tray.

If you are printing on special materials, use the Bypass Tray.

• An incorrect type of paper is being used. Use only paper that meets the

specifications required by the machine. (See

Media Types

on page 151.)

• There may be debris inside the machine.

Press the release latch on

the left side of the machine and open

the front door, remove the

print cartridge and any debris. Reinsert the print cartridge.

Transparencies stick together in
the paper exit.

• Use only transparencies specifically designed for laser printers. Remove

each transparency as it exits from the machine.

Envelopes skew or fail to feed
correctly.

• Ensure that the paper guides are against both sides of the envelopes.

The originals keep jamming in
the

automatic document feeder

• If an original does not feed into the machine, the

automatic document

feeder

rubber pad may need to be replaced. Contact a service

representative.

Condition

Suggested Solutions

Summary of Contents for WorkCentre 3315DN







































































































































































































































































Search results

Summary of Contents for WorkCentre 3315DN

Reviews:

Related manuals for WorkCentre 3315DN

Brands by name

Popular brands

Xerox WorkCentre 3315DN, User Manual

Search results

Summary of Contents for WorkCentre 3315DN

Reviews:

Related manuals for WorkCentre 3315DN

Brands by name

Popular brands