Xerox WorkCentre 3315DN User Manual Download

Page: 48 / 262

Scan Procedure

Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide

Document Glass

The

document glass

can be used for oversized, torn or damaged originals and for books and

magazines.

Open the

automatic document feeder

and place single

documents face down on the

document glass

aligned

with the rear left corner.

The default document size is 8.5 x 11” or A4. For other
sized documents, change the

Original Size

option. Refer

Scan Options

on page 53 for further information.

Note:

Documents are only scanned once even when

several copies are selected.

Select the Scan Destination

Note:

Some options may be unavailable depending on your machine configuration.

Scan to USB

Load the documents to be scanned either face down on the

document glass

or face up into the

automatic document feeder

Insert a

USB Memory Device

into the

USB memory port

on your machine. The USB menu

automatically displays.

Note:

When in

Power Save

mode, the machine will not recognize when a

USB Memory Device

inserted into the USB port. Press any button to restore the machine to a normal state and reinsert
the

USB Memory Device

into the port.

Press the up/down arrows to highlight

Scan to

USB

and press

Scan to Local PC

To use

Scan to Local PC

, the machine must be connected to your PC or workstation via a USB cable. The

scan driver must be installed on your PC prior to use. For instructions, refer to the

System Administrator

Guide

Press

Scan

on the

control panel

Press the up/down arrows to highlight

Local PC

Press

. If you see the

Not Available

message, check the port connection and/or setup.

Press the up/down arrows until the scan destination you want highlights and press

Summary of Contents for WorkCentre 3315DN







































































































































































































































































Search results

Summary of Contents for WorkCentre 3315DN

Reviews:

Related manuals for WorkCentre 3315DN

Brands by name

Popular brands

Xerox WorkCentre 3315DN, User Manual

Search results

Summary of Contents for WorkCentre 3315DN

Reviews:

Related manuals for WorkCentre 3315DN

Brands by name

Popular brands