Copy and Scan Problems
If the copy or scan quality is poor, refer to the following table.
Symptoms
Solutions
Lines or streaks are present in copies only made from
the document feeder.
There is debris on the document glass. When
scanning, the paper from the document feeder
passes over the debris creating lines or streaks. Clean
all glass surfaces with a lint-free cloth.
Spots are present in copies taken from the document
glass.
There is debris on the document glass. When
scanning, the debris creates a spot on the image.
Clean all glass surfaces with a lint-free cloth.
The reverse side of the original appears on the copy
or scan.
Turn on
Background Suppression
.
The image is too light or too dark.
To lighten or darken the image, use the Lighten/
Darken tab in either the Scan To or Copy function.
If the problem persists, for online support information, go to:
•
www.xerox.com/office/WC3335support
•
www.xerox.com/office/WC3345support
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
User Guide
193
Summary of Contents for WorkCentre 3335
