Network Connectivity
Configuring SNMPv1/v2c
SNMP is a network management protocol. SNMP version 1 (SNMPv1) is the first implementation of the
SNMP protocol. It operates over protocols including UDP, IP, and IPX.
SNMP version 2 (SNMPv2c) includes improvements in performance, confidentiality, and
manager-to-manager communications over SNMPv1, however it uses the simple-community based
security scheme of SNMPv1.
1.
At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press
Enter
or
Return
.
Note:
If you do not know the IP address of your printer, see
Finding the IP Address of Your Printer
on
page 12.
2.
Click
Properties
>
Protocols
>
SNMP
>
Edit SNMPv1/v2c Properties
.
3.
For GET Community Name, type a name.
4.
To allow a host with this community name to perform SNMP SETS on the printer, for SET
Community Name, type a name.
5.
To allow a host with this community name to receive traps from printer, for Trap Community Name,
type a name.
6.
For up to four configurations, do the following:
a.
For Trap Address Type, select an option.
b.
For Trap Destination Address, type an IP address. IPv4 address format is x.x.x.x, where x
represents a decimal number from 0 through 255. Ensure that the value entered is a valid
address and does not start with 127 or a number from 224 through 254. IPv6 addresses
contain hexadecimal digits delimited by the colon (
:
) character, and can be up to 39 characters
in length.
c.
For Port Number, type a number from 0 through 65535.
d.
To send notifications to specified addresses, for Notify, select the trap types.
7.
To enable authentication traps, for Authentication Error Trap, select
Enabled
.
8.
Click
Save Changes
.
Configuring SNMPv3
SNMPv3 is the current standard version of SNMP defined by the Internet Engineering Task Force (IETF).
It provides three important security features:
•
Message integrity to ensure that a packet has not been tampered with in transit
•
Authentication to verify that the message is from a valid source
•
Encryption of packets to prevent unauthorized access
50
Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer
System Administrator Guide
