Installation and Setup
Xerox
®
WorkCentre
®
3655/3655i Multifunction Printer
37
User Guide
Turning the Printer On and Off
This printer has both a power switch and a power button. The power switch on the side of the printer
controls the main power to the printer. The control panel power button controls power to the printer
electronic components. The preferred software-controlled printer shutdown method is to press the power
button.
To turn on the printer:
•
Turn on the power switch.
•
If the power switch is on, but the printer is powered off, the printer was turned off using the power
button. To turn on the printer, on the control panel, press
Power
.
To turn off the printer:
CAUTIONS:
•
To prevent a printer malfunction or damage to the internal hard drive, perform the
power button shutdown first.
•
Do not plug or unplug the power cord while the printer is powered on.
1.
On the control panel, press
Power
.
2.
Touch
Power Down
.
After 10 seconds, the touch screen goes dark and the Power Saver button flashes until the printer
has completed powering down.
Note:
When all of the control panel lights are off, the printer power off sequence is complete.
Turning the power switch off is optional.