Installation and Setup
Xerox
®
WorkCentre
®
3655/3655i Multifunction Printer
45
User Guide
Installing Print Drivers for Macintosh OS X Version 10.7 and Later
Install the Xerox print driver to access all features of your printer.
To install the print driver software:
1.
Insert the
Software and Documentation disc
into the appropriate drive on your computer.
2.
To view the .
dmg
file for your printer, double-click the disc icon on your desktop.
3.
Open the
.dmg
file, then navigate to the appropriate installer file for your operating system.
4.
Open the installer file.
5.
To acknowledge the warning and introductory messages, click
Continue
. Click
Continue
again.
6.
To accept the license agreement, click
Continue
, then click
Agree
.
7.
To accept the current installation location, click
Install
, or select another location for the installation
files, then click
Install
.
8.
Enter your password, then click
OK
.
9.
Select your printer in the list of discovered printers, then click
Continue
.
10.
If your printer does not appear in the list of discovered printers:
a.
Click the
Network Printer Icon
.
b.
Type the IP address of your printer, then click
Continue
.
c.
Select your printer in the list of discovered printers, then click
Continue
.
11.
To accept the print queue message, click
OK
.
12.
To accept the installation success message, click
Close
.
Note:
The printer is automatically added to the printer queue in Macintosh OS X version 10.4 and
later.
To verify that the print driver recognizes the installed options:
1.
From the Apple menu, click
System Preferences
>
Print and Scan
.
2.
Select the printer in the list, then click
Options and Supplies
.
3.
Click
Options
.
4.
Confirm that all of the options installed on the printer appear correct.
5.
If you change settings, click
OK
, close the window, then exit System Preferences.
