Installation
Xerox® Smart Card
Installation Guide
12
Software Enablement
Prior to installing the
Xerox Smart Card
solution, the software requires enabling on your Xerox device
using Internet Services. The Feature Enable Key is printed on the inside cover of the Enablement guide
provided within the
Xerox Smart Card
kit.
Follow the instructions below to enable the device software:
Xerox WorkCentre 5632/5638/5655/5665/5675/5687, Xerox WorkCentre 5135/5150 and Xerox
WorkCentre 5030/5050:
1.
Access
Tools
at the device
a.
At the Xerox WorkCentre, press the
Access
button on the control panel.
b.
Enter the appropriate User ID and Password to access
Tools
.
Note: The default user name and password are:
admin
and
1111
.
c.
Select
Go to Tools
.
2.
Enable the
Smart Card
Software
a.
Select
More
to access additional
Tools
options.
b.
Select
Optional Services
. If necessary, use
More
to navigate to the option.
c.
Select
Smart Card
. If necessary, use
More
to navigate to the option.
d.
When prompted, select the
Option Kit Number
entry box and enter the unique
Feature
Enable Key
provided on the inside cover of the
Smart Card Enablement Guide
.
e.
Select
Exit Tools
.
Xerox WorkCentre 5735/5740/5755/5765/5775/5790:
1.
Access
Tools
at the device
a.
At the WorkCentre, press the
Machine Status
button on the control panel.
b.
Select the
Tools
tab.
c.
Enter the appropriate User ID and Password to access
Tools
.
Note: The default user name and password are:
admin
and
1111
.
2.
Enable the
Smart Card
Software
a.
Select
Service Settings
.
b.
Select
Optional Services
.
c.
Select
Smart Card
.
d.
When prompted, select the entry box and enter the unique
Feature Enable Key
provided on
the inside cover of the
Smart Card Enablement Guide
.
e.
Select
Enter
.
f.
Reboot the device (the device may automatically reboot).
Once the reboot is complete, the
Smart Card
function is ready to be configured using the
Internet
Services
interface.
Note:
No services will be restricted until
Smart Card
has been configured using Internet Services.
