Installation
Xerox® Smart Card
Installation Guide
13
Configuring the Smart Card
Once the
Xerox Smart Card
feature has been enabled on the device it can be configured using Internet
Services.
Follow the instructions below to enable and configure the
Smart Card
:
1.
Access
Internet Services
a.
Open the web browser from your Workstation.
b.
In the URL field, enter http://
followed by the IP Address of the
device. For example: If the IP
Address is 192.168.100.100,
enter the following into the URL
field: http://192.168.100.100.
c.
Press
Enter
to view the
Home
page.
2.
Access
Properties
a.
Select the
Properties
tab.
b.
If prompted, enter the Administrator User ID and Password. The default is
admin
and
1111
.
c.
Select the
Login
button.
3.
Configure the date and time to update automatically
a.
Select
Connectivity
.
b.
Select
Protocols
and then
NTP
.
Note:
A pop-up window may appear
requiring you to login.
c.
Ensure the
NTP Enabled box
is
checked for the
Network Time
Protocol
option, then enter the
IP
Address
or the
NTP Host Server
Name
.
In most cases this will be your DHCP
server, and it will provide the time in
Greenwich which must be corrected
for your time zone by the GMT offset.
d.
At the
Offset of Local Time Zone
option select the GMT offset that is correct for your region.
e.
Select
Apply
. The device may reboot.
Note:
The sign in front of the number is important. Most of Europe is plus of Greenwich Mean
Time, while North America is minus. Please consider the implications of Daylight Savings Time
when selecting the Offset of Local Time Zone option.
Note:
If Network Time Protocol is not available, check that the time set on the device matches the
network time on the Domain Controller Authentication Server.
