Xerox WorkCentre 5325 User Giude Download

Page: 190 / 222

Troubleshooting

WorkCentre 5300 Series Multifunction Printer
User Guide

190

Check inside the finisher for any loose staples and remove them.

Open the staple cartridge clamp by pulling firmly in the direction shown.

WARNING:

The points of the jammed staples are sharp. Remove the jammed staples carefully.

Remove the jammed staples (1), then push the clamp in the direction shown until it snaps into the
locked position (2).

Grip the staple cartridge by the orange handle and insert it into the stapler until it clicks into place.

Close the finisher front door.

wc53xx-053

wc53xx-097

wc53xx-098

wc53xx-099

Summary of Contents for WorkCentre 5325































































































































































































































Search results

Summary of Contents for WorkCentre 5325

Reviews:

Related manuals for WorkCentre 5325

Brands by name

Popular brands

Xerox WorkCentre 5325, User Giude

Search results

Summary of Contents for WorkCentre 5325

Reviews:

Related manuals for WorkCentre 5325

Brands by name

Popular brands